Episode Transcript
00:00:00:01 - 00:00:06:49
Shaana
Hey, why don't I just move down there and work the lab? He goes, you would do that? I'm like, hell yeah.
00:00:06:54 - 00:00:23:27
Austin
I do a lot of part time jobs. I work probably 40 part time jobs. So we knew there was a challenge, and I was just happened to be in the seat that needed to come up with the solution. You know, I can open up an STL and have it split in ten minutes. No problem.
00:00:23:32 - 00:00:36:04
Shaana
The first time I sat down to design a crown, I was like, I'm going to do this for the rest of my life.
00:00:36:09 - 00:01:00:19
Rob
Welcome back to the Evolution of Dental Podcast. Brought to you by Evolution Dental Science. We share the stories of the people and the technology shaping the world of ministry, and every full arch smile you've ever seen has a doctor's name on it, right? Somewhere between that and somewhere behind that is a lab tech who held a bar up to the light and saw imperfections that nobody else would ever notice, but it mattered to them.
00:01:00:24 - 00:01:15:50
Rob
We've got two of those people with us today Austin Heath and Shauna Grip. Austin builds the art from the metal up, and Shawna makes it look like it grew there. Neither of them came through this the easy way, and we're here to hear their stories. Welcome to the Evolution of Dental podcast. How are you both?
00:01:15:55 - 00:01:17:45
Austin
I'm great. Yeah. Thanks for having us.
00:01:17:48 - 00:01:19:00
Shaana
I'm good too.
00:01:19:04 - 00:01:27:31
Rob
Thank you for being here. That's Austin before the lab titles. What was the first thing you made that you really felt proud of? Like with your hands.
00:01:27:36 - 00:01:48:02
Austin
Free dental. Something that I made with my hands that I really enjoyed, that I still do today is remote control cars. So you build them from a box, tinkering with toys and screws and and mechanics, even some of the thread pitches on the screws on the cars match some of the stuff we use in the lab, which is just unique crossover.
00:01:48:07 - 00:02:09:20
Rob
That that is fascinating. And I don't think I ever would have thought about that on its own. Yeah. Sean, you are you. I've heard you say before, at least because I've been following your social media for a while, and one of the things I really love about it is just the in-depth level that you go with some of the cases you work on and the level of artistry that you've said before that you were an introvert at the bench.
00:02:09:21 - 00:02:12:09
Rob
What made you decide to turn on the camera?
00:02:12:14 - 00:02:13:21
Shaana
Oh my gosh.
00:02:13:26 - 00:02:21:04
Shaana
I have no idea. I was terrified, literally terrified. Like, I go back and listen to the very first video and I'm like, wow, like.
00:02:21:04 - 00:02:25:57
Shaana
Voice is shaking, but I, I decided I would help.
00:02:26:00 - 00:02:44:52
Shaana
Other assistants because that's actually where I started, was chair side and moved into the lab. And I just wanted to help others kind of follow my path. And I just found a love in teaching and I was like, well, the only way to get used to teaching is if I just start growing a voice. So that's where I went.
00:02:45:04 - 00:02:56:33
Shaana
So I went straight to social media to be able to start one teaching myself, but then kind of getting out there also for people to kind of see what I do, what I know, and how I can share it. So.
00:02:56:36 - 00:03:01:48
Rob
And what brought you into dentistry?
00:03:01:52 - 00:03:29:28
Shaana
God, I can't remember how I got it. I started as a dental assistant, and I had the privilege of working for some really amazing doctors, and they really pushed me in the sense of I wanted to know everything I wanted to because I was artistic and big into art, drawing and painting. That was when Serik first hit the market, and it was like a big wave that was coming in and I was like, I want to try it.
00:03:29:28 - 00:03:39:40
Shaana
I want to design. So the first time I sat down to design a crown, I was like, I'm going to do this for the rest of my life. And from there on, I was like, I just took off with it.
00:03:39:43 - 00:03:41:52
Rob
So first time it just hit you like that.
00:03:41:57 - 00:03:43:28
Shaana
It just hit me and.
00:03:43:31 - 00:03:44:06
Rob
That's amazing.
00:03:44:07 - 00:03:46:24
Shaana
I haven't I haven't stopped since.
00:03:46:28 - 00:03:56:40
Rob
Well, what about you, Austin? What what drew you into this? Like what? What was the lead from remote control cars to, you know, implants and bridges and milling machines? Sure.
00:03:56:45 - 00:04:22:02
Austin
Yeah. It certainly didn't start out as a bug that I caught. Originally, it did start as a job. Something paid by the hour. At first I was a driver because, I was hired, or I wanted to be hired in this dental lab, and I didn't know anything about teeth or dentistry at all. My brother was in dental school, so he had recommended the lab side of things for me, and.
00:04:22:02 - 00:04:44:19
Austin
And I'm glad he did. Earlier on, I started in the model department after being the driver. So I started to make things and I really enjoyed that. So I just kept doing it until that bug just was natural and it did become fun. Everything I was doing was in some sense a challenge, but I took it as fun and a learning opportunity.
00:04:44:19 - 00:04:49:09
Austin
So, yeah, that bug set in slow and it's never left.
00:04:49:14 - 00:04:59:16
Rob
What was the first breakthrough of Wow? This has to be down to the micron precision level. And what was the first thing you had to remake?
00:04:59:21 - 00:05:31:50
Austin
The level of perfection and in high standards were set in me. Early on at my first location, I definitely have had an opportunity to work under some really amazing technicians and business owners as a whole. But the first thing that I would have had to remake would have been trimming a die. Something like sawing a prepped tooth away from the rest of the model and hitting something that called a margin.
00:05:31:52 - 00:05:48:00
Austin
You know, I didn't know that, you're not supposed to touch them. They're supposed to be pristine. So that was probably some of the the first remakes I had was to repair a model PFM and casting that that was a long history of remakes there for me.
00:05:48:04 - 00:05:53:50
Rob
I see it on Shauna's face over there. I can see like horror film, my eyes twitching.
00:05:54:04 - 00:06:17:04
Shaana
I'm like, oh God, I remember that. And waxing, oh my God. Max waxing all day, every day, over and over and over and over and over. Yeah. If you ever want to know how to get better at whatever you're doing in dentistry, wax this wax. Just keep waxing and make somebody check it. And I remember back in the day, I feel so proud of it and walk on and be like, look what I did.
00:06:17:04 - 00:06:22:09
Shaana
And they're like, go do it again. Go do it again. You know, today I'm grateful.
00:06:22:19 - 00:06:27:43
Rob
You put all this effort and love into it. And then they come back and they're like, yeah, no. Try again.
00:06:27:48 - 00:06:41:33
Shaana
Oh yeah. It's like I had a thick skin. I wanted to learn so bad that I was like, okay, I'll go do it again. And I just I just kept going. I just kept going. I didn't stop, but yeah, that was.
00:06:41:38 - 00:07:03:00
Austin
And speaking of that topic, you know, doing it again, I think that the negative term of our industry is a remake. Yeah. And and that gets set into technicians early. You don't necessarily want to do it again. But now that I've started my own business, I'm training some, you know, new technicians who've never done this before.
00:07:03:04 - 00:07:24:14
Austin
I'm trying to change that a bit. Doing it again is how I got better. You know, that is the form of training. So I try not to, you know, make it a negative thing that you're doing the same case again, because in fact, that's just practice that makes perfect. The only way that I learned all this stuff was by making mistakes.
00:07:24:19 - 00:07:37:09
Austin
You know, I'm going to try to set you up for success and show you some of the things that I learned to try to maybe prevent those same exact mistakes. But yeah, it's okay to make a mistake as long as you learn from them.
00:07:37:14 - 00:07:42:19
Rob
Absolutely. And, Sean, I especially with your teaching, I'm sure that that's something that's come up a lot.
00:07:42:24 - 00:08:02:21
Shaana
It does come up, but I think I really try to focus on making sure everyone shows up and feeling like they're really getting something from it. I remember going to a lot of courses, you know, throughout my career and being nervous to actually sit in these classes. And I really just try to focus on not boring you with instant, you know, hours of slides.
00:08:02:21 - 00:08:19:26
Shaana
We jump straight in on hands on, and I go to each individual person and, you know, each person could have a different technique that I know in the back of my head to use. Not everyone's going to be the same. So in the way that people understand things is, you know, the same thing. So I like it when they come.
00:08:19:40 - 00:08:39:43
Shaana
You know, I love it when clinical comes because there's no bad habits to, like, overcome and like, no, like try this way it'll it'll help. And you know, technicians with years behind them are just like, oh, I got this. But, you know, not having experience and going to these courses, if that's what I really want, you know, the most out of this.
00:08:39:48 - 00:08:57:21
Rob
Oh, I didn't see you there. Hey y'all, it's Robert with the Evolution of Dental podcast. If you love these stories and you want to see more guests, more content and help the show, please remember to share it. Like it? Subscribe to our channel and hit that little notification bell if you're watching on YouTube so you can get notified of our new episodes.
00:08:57:28 - 00:09:05:48
Rob
New episodes drop every Friday. Follow us on all the socials. You'll see all the latest content. Looking forward to seeing you there.
00:09:05:52 - 00:09:16:28
Austin
At EDM. We've got a training facility or area that's getting put together, so hopefully we we have some of these nice, fun learning experiences soon.
00:09:16:33 - 00:09:23:19
Rob
Yeah, that's a pretty good segue. So how did y'all how did you meet and what is this facility that you're sitting in that you're talking about?
00:09:23:24 - 00:09:54:55
Austin
Sure. Yeah. It's a 2000ft². It's kind of split in half between a warehouse style building in the back with a roll up door for 18 wheelers, and then up front here we have it. Really nicely finished. We have this podcast room. We have a training area. Probably have maybe 15 seats. We have 105 inch TV on the wall for for close up video for slides or training aspects.
00:09:55:00 - 00:10:28:07
Austin
And then we have a entire lab section, obviously with finishing benches, polishing benches. Both of our computer setups are there. We've probably known of each other for a few years. Being in this dental tech space, sharing online in a lot of the forms together, a lot of the shows, you know, crossing paths that way. And then when I branched out and started EDM or Elite Dental Manufacturing, I was trying to position myself as only a milling center.
00:10:28:12 - 00:10:48:26
Austin
And then I realized kind of quickly that there is a demand for for final finished prosthetics. So I reached out to Shauna and I said, hey, would you be interested in in helping me finish these cases? I'll overnight them to you. You finish them and you overnight back to me or directly to the clinician. Yeah. And that works.
00:10:48:28 - 00:11:15:12
Austin
We've we've been doing that for maybe close to a year, maybe close to 12 months. And then wow, it happened fast. But maybe, maybe a month and a half at the most. We started talking about moving Shauna down here and working in the building. Providing a place to do some training. Obviously, being closer to the work, being able to take more photographs for Instagram and social media.
00:11:15:26 - 00:11:25:09
Austin
And I'm just I'm nothing more than extremely excited. This is only week two, and it's already starting to get exciting.
00:11:25:14 - 00:11:47:04
Shaana
So the real phone call went, hey, why don't I just move down there and work the lab? He goes, you would do that? I'm like, hell yeah. And then that's that's kind of that's how we got. That's how we made this all happen. Yeah, but it was like the perfect scenario, the perfect storm. Because, you know, we're both just, like, coasting down this all in X lane.
00:11:47:16 - 00:12:08:24
Shaana
And you know, we were really adamant about moving our careers into the areas that we love the most. And manufacturing for him is like, you don't wake up and you go to a job. And for me to wake up and do finishing or content creation or teaching, that's not a job to me. That's like, I want to wake up and do it.
00:12:08:24 - 00:12:25:14
Shaana
So it's like we got to like, join forces and like create this little bubble of all on X, you know, then providing workflow. So it's kind of like we made an in-house lab environment without the doctors having to buy the lab.
00:12:25:19 - 00:12:26:09
Austin
That's exactly right.
00:12:26:09 - 00:12:52:43
Shaana
So that's what it feels like. So we get that, you know, that intimacy of conversation, of getting to know them and what they like and, you know, getting things turned around quickly. Not only that, you know, we can actually install machines. We do remote nesting, we do design. We also do finish. So there's like multiple different areas of this workflow in the all in bubble that we're able to do, and we get to do all the parts that we love to do.
00:12:52:48 - 00:13:20:12
Austin
I think that's the biggest thing I pull out of, is we literally pick the steps we like the most, and that's what we do. I, you know, really enjoy running the mills. I enjoy, like, having conversations with the dentist about the surgeries or workflows. And, and I'm able to focus on that stuff every day and saying with Shauna, you know, all the aspects like training and characterization and, you know, the things that she likes.
00:13:20:12 - 00:13:34:38
Austin
She was able to, to pick out. And now we've combined those forces together, which is extremely exciting. I moved multiple times in my career, thousands of miles for a job, but I never really knew anyone else to do that.
00:13:34:43 - 00:13:36:33
Shaana
I was like, why not? I was bored.
00:13:36:38 - 00:13:47:12
Rob
The first year. Pretty. I think that's something that's probably under discussed. What do you think is gained or lost by people working remotely from each with from each other, or versus being in the same building together?
00:13:47:16 - 00:13:48:12
Shaana
Oh, tons.
00:13:48:24 - 00:14:13:57
Austin
Time is one for sure. That's probably the easiest one, right? Like for me to mail a case to Shauna and get it back or check it, or if something was to go wrong, you're losing that time. And then I mean, physically talking to someone about a case or about a process in person is significantly different than trying to do that same thing over the phone or a video phone call.
00:14:13:57 - 00:14:29:48
Austin
So, yeah, it's it's it's very beneficial. And I started seeing those aspects of, of, of the benefit of working in house together in the same lab together. So yeah, I'm glad we were able to pull it off.
00:14:29:52 - 00:14:47:02
Shaana
I was, you know, visiting a lot of labs. I was doing a lot of training, but it was like I was getting questions daily about, you know, creating workflows, talking about workflows. You know, you know, what machines do I get? You know, how do I do this? How do I set up or how do I make this more efficient?
00:14:47:07 - 00:14:55:24
Shaana
But then we were conversing a lot, you know, back and forth about I was like, I'm thinking the back of my head like, why are we not just doing this together? You know what I mean?
00:14:55:26 - 00:15:27:24
Austin
I always knew it was going to happen. Along the way, at every single one of these labs, I mentioned to not only the owner, but any technician that was there for a length of time that, hey, one day I am going to make a place. One day I am going to make a lab and we can all work together as far as, as you know, transitioning away from working from for someone else to just myself in this full arch world, most of the dentists are friends with each other or they know of each other.
00:15:27:36 - 00:15:53:19
Austin
So I was able to help Doctor Jonathan Bullard here in Augusta, Georgia. And then I was able to do that for some of his friends. And that slowly progressed to where I was doing sort of a part time job, making a little extra money on the side for helping other clinicians. And once that number grew to about ten, it started to be kind of two full time jobs.
00:15:53:24 - 00:16:22:43
Austin
I had a open conversation with Doctor Bullard and I said, look, I think this is going to take off. I really want to focus, just on EDM. And and we slowly transitioned myself out of Bullard Dental and fully here at EDM, and then growing from just working for myself to adding 1 or 2 or more technicians on, that decision process is still being made.
00:16:22:52 - 00:16:38:45
Austin
I do a lot of part time jobs. I work probably 40 part time jobs. So whenever one of those, whenever one of those part time jobs becomes enough for a full time job, that's when I start thinking about having the help.
00:16:38:50 - 00:16:43:09
Rob
What's that teach you about running a business? You think.
00:16:43:14 - 00:17:17:40
Austin
You know people is the hardest part, but I certainly have learned that along the way. From ownership to, you know, reps that you're dealing with to customer service technicians, coworkers, employees, people all operate differently. So you've got to for me, it's about understanding the person, understanding the things that they like, that they don't like, and just getting to know them and trying to create an environment that is for them.
00:17:17:45 - 00:17:40:38
Austin
Everyone wants something different around their job or their work or their career. So trying to to figure out what that is, is, is certainly the most challenging, but it's also the most rewarding because you can you're literally not doing things for them that aren't helping them. You're just doing things for them that are, you know, helping them or or what they would like.
00:17:40:43 - 00:17:42:45
Shaana
Yeah, you're a good leader.
00:17:42:50 - 00:17:43:04
Austin
No.
00:17:43:04 - 00:17:44:55
Shaana
Thank you. I don't feel like you're a boss.
00:17:45:00 - 00:17:47:26
Austin
Yeah, that's a good thing. That term sometimes I.
00:17:47:31 - 00:17:48:52
Shaana
Like, I like.
00:17:48:57 - 00:18:03:21
Rob
Though that's a really important thing to say. Yeah. It's one of the, one of the different, one of the distinctions that Andy, you know founder of evolution, it's one of the things I really like that he makes the distinction. You work with us. For us.
00:18:03:26 - 00:18:24:28
Austin
I think is this place grows. We should all I, I will always at this point everyone knows what every step is. They may not know how to do it perfectly, but they at least know every step. And to me, that's the the biggest way you can help is to try to show each other that you're there for them.
00:18:24:33 - 00:18:29:43
Austin
You know, and, and it's, it's oftentimes that you can learn from them.
00:18:29:48 - 00:18:39:02
Rob
What's it been like for you Seana since you moved down to Georgia. And since you've got this whole new environment. And I'm assuming you didn't just walk in the door sit down and start working. You probably brought some changes.
00:18:39:14 - 00:18:41:00
Shaana
Actually I actually did.
00:18:41:00 - 00:18:41:52
Austin
You really.
00:18:41:57 - 00:18:42:19
Rob
Showed up.
00:18:42:28 - 00:18:56:38
Shaana
I had I had foxes stacked up. I mean I flew in from New Orleans and then I had one day or like two days to unpack my stuff, and then I showed up to work. And then I was like, all right, what do we got to do? He's like, all right, finish this. I was like, got it? Yeah, we finished it.
00:18:56:43 - 00:19:12:55
Shaana
I finished it that day and then just started unpacking some things. So because I'm kind of bringing my lab, you know, my lab has been in, you know, Virginia for forever and kind of incorporating all of the things and kind of creating our workflow. So it's been a busy. This is week two. I like it.
00:19:12:57 - 00:19:49:55
Austin
Yeah. She came in swing and I had case bands lined up. We obviously we worked closely together and we talked often, but I knew which which would be the last case that I would mail to her and anticipated. This is going to be the first case that she'll do here. Can you imagine, from my perspective, to send these cases off to the person that I think is the best in the world at this, and then receiving not just the finished case in in the box or it being delivered to the dentist, but like this museum quality photograph that represents truly how how nicely it looks.
00:19:50:00 - 00:20:12:48
Austin
You know, it's often that you say, oh, the picture doesn't do it justice, but somehow she's able to extract that beauty out of the teeth and get it on social media. So you've managed not only your own Instagram, but mine for a while. Yeah. Yeah. It's, it's a unique skill. And, Yeah, you're really good at it.
00:20:12:50 - 00:20:32:00
Shaana
Thank you, I appreciate it. It's hard work. It is, it is, but I do have I have a little secret. I have a photography background, so it didn't just come to me. One day I'm able to get the photos online that are actually, you know, they. It looks like what you're going to get I promise. So it doesn't.
00:20:32:00 - 00:20:51:38
Shaana
And a lot of people are like, oh, I can't take pictures. My camera is not good enough. The first camera that I used, a few years back was what did I have? It was a rebel, I think, a canon which, you know, you can get for like 600 bucks. That's not bad. And then I had two little off camera flashes.
00:20:51:38 - 00:21:02:36
Shaana
Weren't even name brand. And I would set those up with a little trigger on the top of the camera and use a black backdrop from the dollar store. And that was it.
00:21:02:43 - 00:21:03:31
Austin
That's.
00:21:03:36 - 00:21:06:48
Shaana
That's all I had. Yeah. So a little bit goes a long way.
00:21:06:50 - 00:21:22:13
Austin
I'm sure once you get your photo booth all set up here, you can probably make a video. This is what it this is what it takes. And I think one of the things is having the area right, not having to scrounge and find the light and plug this in. And where's the camera and the battery for this. Yeah.
00:21:22:14 - 00:21:35:00
Austin
So trying to have it conveniently accessible. Yeah. It's also good. And then learning the right settings and usually just forgetting them. Right. Just setting it once and then yeah leaving everything the same.
00:21:35:02 - 00:21:51:28
Shaana
Yep. My camera stage is ready to roll at any point. That that has been a game changer for me. But yeah, but a lot of people get overwhelmed by the cameras and they want to overspend and they gotta buy the big fancy flashes and the over like 2 or 3000 other. You don't need a you really don't.
00:21:51:28 - 00:21:58:21
Shaana
You can actually take pictures with your iPhone. All of my videos that I have in content are generally shot on my iPhone.
00:21:58:28 - 00:22:19:07
Rob
What are some things that you've run across? And this is a question from both of you. What are some things you because, you know, you've come from very different but, overlapping lab management situations. What are some things you've run across both in labs and practices that you have? You just have to cut this out and change your mindset, change your workflow.
00:22:19:12 - 00:22:21:38
Austin
Like a hard no, something that you've seen, something.
00:22:21:38 - 00:22:26:19
Rob
You come across like no, no, no no. Guys this just can't work. We got to change this.
00:22:26:24 - 00:22:49:55
Shaana
I know I probably not change anything. I think everyone's ecosystem is a little different. I would say it starts chair side. If you're not data collecting correctly and you're not getting enough of it, it's a struggle for the whole process. So I mean, it really does start a number. A number one is the data you are collecting chair side.
00:22:50:00 - 00:23:14:28
Shaana
It has to be spot on. You've got to make sure the shades of the teeth and the tissue is scans, photographs, all of it, you know, documenting exactly what you're going to be doing next. And it's stated clearly that will make or break a case. And I think I see more people skipping or forgetting or just saying, oh, no, it'll, you know, we'll we'll pick it up later down the road.
00:23:14:31 - 00:23:16:01
Shaana
And it never really works out.
00:23:16:01 - 00:23:17:14
Rob
For the best.
00:23:17:19 - 00:23:18:48
Shaana
Promise it doesn't.
00:23:18:52 - 00:23:48:21
Austin
We often get the phone call after surgery. Yeah, right. It's it's like it's ready to be designed. And, and it's, it's oftentimes that we're having to train them on a step that they needed to do before. Right. Hey, actually, we need you to go back in and do this. So that is a challenge, you know, trying to work through the existing case, but then set them up for success, certainly for that next case.
00:23:48:21 - 00:24:05:24
Austin
Hey, this is what we should have done in hindsight. We should have done this. Yeah. And that relationship forming, that's what we're doing often is talking to offices who aren't quite sending stuff yet to us, but setting them up for success when they are ready to send to us.
00:24:05:24 - 00:24:21:21
Shaana
There's not a lot of support out there, you know, it's like growing up. I've been doing this for 15 years. There's not a lot of, you know, clinical support or, you know, people are able to kind of handhold through a lot of this. You can go to your your classes and your courses and, you know, doctors get a lot of opportunity.
00:24:21:21 - 00:24:29:50
Shaana
But the clinical staff, you know, sometimes you just need that voice to talk to like, all right, what's the checklist look like? You know, let's talk about this. You know.
00:24:29:55 - 00:24:31:40
Rob
It's a list.
00:24:31:45 - 00:24:48:04
Shaana
Yeah. Do we even have a checklist? It's a it's a big deal. These aren't we're not just making, like one single unit crown. We're we're making, like, a full mouth. We're reconstructing everything. So a lot of things need to be, you know, talked about. You need to have a team. You need to have a team mentality. You have to have a team.
00:24:48:04 - 00:25:03:02
Shaana
You have to have a plan. Walk into this always with a plan. Whether it be the lab or clinical doing surgery. Yeah. You've got to be you. You have to understand both sides. And I think everybody has to understand everybody's job, even though they don't do it.
00:25:03:04 - 00:25:24:36
Austin
Team. Team is the best word. And I think that you eat dental manufacturing that that's what we are. We're a part of your team, right. We're here to help. So I think that gives some peace of mind not only to the dentist doing the surgery, but we also get to know the staff well. Right. It's oftentimes that there's the assistant with, you know, next to the doctor.
00:25:24:36 - 00:25:40:45
Austin
And we're able to to kind of befriend them and get on on terms where we can healthily talk about, you know, workflows and, and what to do and material and, you know, screws all the different aspects of all. Onyx. There's so many.
00:25:40:50 - 00:25:45:21
Shaana
Yeah, things can go crazy. It's always nice to have somebody to talk to.
00:25:45:26 - 00:26:12:16
Rob
Speaking of screws though, and the technicalities of the manufacturing, what what's something about titanium manufacturing you think is probably commonly overlooked because you one thing you mentioned earlier in the conversation was a 300 0 pound milling machine coming in the back door. Those people's milling machines are 300 pounds and that's already heavy. What what does that change about the way you look at stuff and what do you think other people who aren't directly involved with it maybe should understand better?
00:26:12:16 - 00:26:13:31
Rob
Better?
00:26:13:36 - 00:26:41:21
Austin
Yeah, I think the, the biggest, it's like they're not naive. You get one mill, you mill one material, you're successful in it. Maybe you have some trial and error and you get better. And then I think the thought is just, okay, well, now we'll mill metal, now we'll mill our own bars. 3 or 4 years ago, I helped a lot of people set up their titanium mill.
00:26:41:26 - 00:27:10:11
Austin
They were very successful for a little while. The problem with titanium manufacturing and metal manufacturing as a whole is it is an entirely different challenge. You know, when you think about milling or in a dry environment, you don't have any liquid or coolant to worry about. So that's a new thing. The tool where the tool paths, metal milling is just challenging.
00:27:10:12 - 00:27:45:36
Austin
So we want to mill for them because we can provide a turnaround time and a price that doesn't require them to buy their own mill. Now, certainly if you buy your own mill and your own titanium and your own tools, you will save a lot of money, you will be able to do it. But to consistently produce a bar after a thousand that is the same quality as number one and two is extensively hard to keep one machine running for multiple years on in, and it consistently produce perfection.
00:27:45:43 - 00:28:01:38
Austin
It takes a lot of work, a lot of effort, a lot of pre-planning. Like I said, from coolant to tool changes to calibration, it's all very, very critical. And, yeah. So metal milling is a challenge.
00:28:01:45 - 00:28:05:02
Rob
What's the difference between a good bar and not a good bar?
00:28:05:07 - 00:28:45:02
Austin
My mindset on these prosthetics is very similar to a custom abutment. Just a full mouth custom abutment. It's basically one big crown and one big custom abutment. So that is the mindset that I have going into a design, having the proper amount of thickness, right? Not only for the bar titanium can bend, but also for the superstructure so that it's evenly, you know, shrinking in the centering furnace, you are getting even color.
00:28:45:16 - 00:28:56:00
Austin
You're not getting a thin area where maybe the bar is showing through and a thick area where you can't see the bar. So it gives you this color discrepancy.
00:28:56:04 - 00:29:05:19
Rob
In your experience. What? For anyone who's trying to pick up some tips here, like what thickness level should somebody be looking for either on the zirconia or on the bar itself?
00:29:05:24 - 00:29:32:31
Austin
Minimum thicknesses for relativity about two millimeters. Two millimeters is nice. It's enough to block out, the greatness of the bar. We do use a block out material from B and D dental on the inside of the zirconia before it's fired, which also adds this level of of white opaque to the inside. We use only white opaque cement.
00:29:32:31 - 00:29:58:43
Austin
So that's also another, you know, kind of thing that we do to try to mitigate the, the bar's color interaction with the T, and then in general, having enough restorative space. So it's often times that a patient is coming from maybe adventure. They had all their teeth extracted. They really didn't have the alveolar or the bone reduction necessary for full arch.
00:29:58:55 - 00:30:26:19
Austin
But we're already moving forward with full art, so we've got to make it work. So having restorative space somewhere around 12mm per arch is an ideal situation. And then, yeah, as far as it goes with the bar design, just having something that's going to be retentive, something that's going to keep the lateral movement of the.
00:30:26:24 - 00:30:27:55
Austin
Yeah, of the patient's mouth.
00:30:27:55 - 00:30:28:43
Shaana
From looking.
00:30:28:43 - 00:30:39:24
Austin
At from sort of talking the bar off of or the teeth off of the bar. Yeah. Those are some of the biggest things.
00:30:39:28 - 00:30:52:24
Rob
You said earlier that, titanium bins and you were talking about the minimum parameters are more or less that you work with with that. What what do you what do you look for to have as that minimum there with the titanium.
00:30:52:28 - 00:31:24:12
Austin
Two by two square. So if you take two millimeters high, two millimeters wide and you make it let's ten, ten, 15mm long, that thickness will bend. So we try to have something like four millimeters of height and two millimeters of width. At a minimum. There are sections of bars in between two implants. Right. So when you're talking about that small section of a bar you can go below those parameters.
00:31:24:12 - 00:31:55:48
Austin
But when you're bridging a large gap between two implants, that's when this minimum thickness of the bar becomes relative. So yeah, four by two would be probably the, the, the smallest size that won't bend four millimeters high two millimeters wide. But it's oftentimes that we're we're going as wide as the intaglio surface of the teeth. Maybe I can hold this one up.
00:31:55:52 - 00:31:56:57
Rob
Yeah okay.
00:31:57:02 - 00:32:21:48
Austin
Still have this is probably six millimeters wide. Right. And we're trying to bring that buckle margin back so that it doesn't show when they smile. And also the lingual margin. You know, we we do orphan times have a metal lingual, but we don't want it to be exposed or a negative Asthetik. So we try to try to just make these bars perfect and
00:32:21:52 - 00:32:40:14
Austin
And that's where blender comes in. You know, I really there's the exo bars. There's blender bars. We do both. We mil we manufacture and design both. But I just really have a passion for this blender program, so I really that's what we use the most.
00:32:40:19 - 00:33:11:19
Rob
Blender's, blender is definitely a big gap filler for the time that exo split bar technique was still coming up, but the I mean, the new version of Exo cab with 3.3 the split bar is almost comically easy to do, but it's interesting that you still lean heavily on blender. You think that that's mostly because you're you have prior experience with it, or you think that there's something about blender that, that it brings to the table that exo cad can't quite fill the gap for, for something or another.
00:33:11:24 - 00:33:44:48
Austin
I think. I think both won the need for the, the this type of bar for, for me personally as a technician in the location that I was at, the need for this bar was extremely high. We were doing a lot of monolithic zirconia and and seeing those fail over time, if not early on. Inevitably, at some point we were seeing fractures or or breaking down of these monolithic zirconia arches, even with tie bases, maybe them coming be bonded from the tie base.
00:33:44:48 - 00:34:13:26
Austin
So we knew there was a challenge, and I was just happened to be in the seat that needed to to come up with the solution. And we were it was taking hours to design a bar within, within the existing temporary mill. That bar put that bar on a model, scan that bar, adapt the teeth to it. So it was like multiple days, multiple hours of my time getting these cases to a bar over unders or Konya.
00:34:13:31 - 00:34:36:45
Austin
And so any amount of time saving, which we're talking about days here. So if I could cut any amount of time off, you know, I was interested in that. So I, I struggled to learn blender early. There was no training programs or videos, just what's on the blender for dental website. So it's really tough to learn that way.
00:34:36:50 - 00:35:10:50
Austin
But I had to and then I then I saw the benefit. Right? I was taking my last temporary. I was taking that into that steel, into blender, splitting it, making a final it being perfect. And I just kept seeing that happen. And early it would take me 30, 45, maybe an hour to design these bars in blender. And then you just get faster and you get faster and you get better and you see the same thing again and again, or a similar case comes up and you've done five of them before like this.
00:35:10:55 - 00:35:40:21
Austin
So for me, it became second nature. And for now I can, you know, I can open up an STL and have it split in ten minutes. No problem. Even like the most challenging of case, I just I just got really good at it. And, Yeah. So by the time exo card had come out with three, three and and and had the ability, I just wasn't in the room to, to need it or to want to learn.
00:35:40:21 - 00:36:06:09
Austin
And I see the designs I we have Daniel that helps with the design. We have Shauna who's very familiar with design and and it is possible we are getting bar designs out of X Acad that are good. I just am no longer in that space to to need to learn it. And and I just really very good and wonderful.
00:36:06:14 - 00:36:08:58
Austin
Yeah yeah yeah. So I, I see with.
00:36:08:59 - 00:36:23:55
Rob
The, with the manufacturing mindset I mean I this earlier you held up the, the plate with all the different bars in it. And for anyone who's ever done any kind of dental manufacturing, they're looking at that going, that's not a 98 millimeter disc.
00:36:23:59 - 00:36:26:04
Austin
Yes. It is actually.
00:36:26:09 - 00:36:30:40
Rob
Slightly different mindset right there.
00:36:30:45 - 00:36:31:48
Rob
Beautiful.
00:36:31:52 - 00:36:50:50
Austin
One 150 by 140 is the length in the width of these. In a puck you can usually get 1 to 2 bars. We're constantly getting 6 to 8 bars in one of these plates. And that also adds to milling times. So our mill, which is running right now, won't stop for another 20 hours.
00:36:50:55 - 00:36:53:38
Rob
Wow.
00:36:53:43 - 00:37:15:09
Rob
I mean, it sounds like it's worth it with all the material, savings there and just being able to pull it out of one, one big plate. So, Shauna, how, we've talked a little bit about the bars and the actual physical structure of it. What about your work makes your make make sure all on X cases look so lifelike and real.
00:37:15:09 - 00:37:24:19
Rob
Where does that start? Does that start at the design? Does it start at the bench when you actually have it? Like where along the way does that magic come through?
00:37:24:24 - 00:37:47:16
Shaana
It is a design will make or break the case design, design, design it designing the contours of an all in X, following the arch and not the tissue makes a big difference. For me, I mean, my two go tos, I mean, I used to layer, you know, back when I don't do as much as, you know, ceramic layering.
00:37:47:16 - 00:38:09:21
Shaana
I'm saying either Mio or Sage Max today. The paint 3D, those are my two go tos. They sit on my bench constantly. So those are the that's really what I do to make it look lifelike. But there's a, matters. I get a lot of questions about, well what's there Konya do I use I don't like this one because this happened.
00:38:09:21 - 00:38:23:14
Shaana
I don't like this one. You got to understand the arch altogether from design all the way through. Sometimes it's not the product, sometimes it's how your your technique and how your, your your progressing through it all.
00:38:23:19 - 00:38:35:45
Rob
Are you designing these cases with the shape of the bar kind of in your mind, as part as a factor in your design, or is that something that you're adapting later on before?
00:38:35:50 - 00:38:50:50
Shaana
So I'm not doing as much designing today. But I'm kind of depending on the designer kind of knowing and being able to communicate and just kind of knowing the expectation of what it's going to, how it's going to turn out on the other side.
00:38:50:55 - 00:38:51:07
Austin
We.
00:38:51:09 - 00:38:51:52
Shaana
Call it. Yeah.
00:38:51:55 - 00:39:21:24
Austin
Thinking with the end goal in mind. So we always know, well, we know if it's going to go to a bar or not. And so we know that usually before the design is finished. And then that vase design, you know in the temporary. Yeah. You can't quite go from this really thin PHP one that the patient loves to wanting a bar and us having to, let's say, thicken up that that design, you know, it's going to impede the speech how it feels.
00:39:21:31 - 00:39:28:52
Austin
So thinking about having the bar in there in the final as you're designing the temporary is extremely critical.
00:39:28:55 - 00:39:29:43
Shaana
Oh yeah.
00:39:29:48 - 00:39:42:07
Shaana
I mean, being able to work with a team from start to finish makes a world of difference. And no one's on the same team and says all the same things and kind of just knows how the flow is supposed, supposed to go.
00:39:42:16 - 00:40:00:02
Austin
Now, I've seen you take an STL not designed by any one of us, and finish it, and it go from not the greatest on screen to wow after you're done with it. But certainly having the design in a tooth mold and a shape and the gingiva thickness any. Correct.
00:40:00:16 - 00:40:19:09
Shaana
He only knows that because he heard me squawking in the corner. But yeah, it does make a big difference. So you know, making sure your design. So cutbacks are a big thing. Don't we don't have to do cutbacks with when we're micro like liquid ceramics. You know, a lot of people. Oh, I got to cut it back.
00:40:19:14 - 00:40:37:43
Shaana
It's not comfortable to the patient. And you don't need that much ceramic on the actual arc itself. So, you know, a lot of I get a lot of questions. Do I do a cut back? No. If you're going to be layering powder ceramics, yes. You do need that, that bit of room because you're going to be putting multiple layers on.
00:40:37:50 - 00:40:55:12
Shaana
If we're using liquid ceramic, I use two fires. It means two layers, one being just the more liquid color. And then the next would be like the structure, the thicker paste that goes on top to give it some body and, stippling texture, stuff like that anatomy.
00:40:55:21 - 00:40:57:33
Austin
But it's still thin enough. It doesn't like bulky.
00:40:57:36 - 00:41:18:26
Shaana
It doesn't bulk it up. So, you know, really if you're if you're doing significant cutbacks, that's not probably the best thing, to really elevate your arches, you know, like, well, how do I get to this? Stop doing cutbacks. You want nice and smooth all the way across. It's not a denture. We don't want any festoons. Just smooth out your gingiva.
00:41:18:31 - 00:41:22:16
Shaana
And put in your characterization on the sermon part of things.
00:41:22:21 - 00:41:29:48
Rob
Where can people find you online? Where can they find the information about your lab, about your courses, about what you're working on?
00:41:29:52 - 00:41:38:07
Austin
We have an awesome website. It is Idiom Dental. You can get a really good idea of the things we do, the services we can offer.
00:41:38:21 - 00:41:47:31
Shaana
So you'll find us on Instagram under Elite Dental Manufacturing or myself. You can find us or my knee under Queen city Lady Tooth Maker.
00:41:47:36 - 00:41:51:14
Rob
Thank you again for being here. This is a lot of fun. Yes.
00:41:51:19 - 00:41:53:43
Austin
We look forward to maybe doing it in the future.
00:41:53:48 - 00:42:17:03
Rob
Absolutely. And thank you, everyone else, for joining us for the Evolution of Dental podcast. Look for us on all the social media platforms and all the podcast platforms. As the Evolution of Dental Podcast. We drop new episodes every Friday. Please remember to like, subscribe, share the show with your friends. Drop a comment. If anything in this episode struck a chord with you, or if you have anything you'd like to add to it.
00:42:17:04 - 00:42:19:57
Rob
And remember, never stop evolving.