Episode 1

November 21, 2025

00:35:25

Digital Dentures: Reinventing Removable Dentistry | Andy Jakson | EODP #1

Hosted by

Robert Norton

Show Notes

Digital dentures have transformed removable dentistry, but getting there meant completely rethinking how dentures were designed, manufactured, and delivered. Andy Jakson, co-founder of AvaDent, joins Rob Norton to share the story behind developing the digital denture workflow and milling the first digital denture in Buffalo, New York.

Andy explores the early challenges of digital denture design, from capturing accurate patient records and developing new workflows to engineering PMMA materials and finding the right milling technology. He also discusses how today's advances in 3D printed dentures, intraoral scanning, exocad, AI-assisted dental design, and digital manufacturing are continuing to reshape both dental laboratories and practices.

Looking toward the future, Andy explains why embracing new dental technology, collaboration, and experimentation will be essential for technicians and clinicians—and why the biggest failure is often being afraid to try.

Chapters

  • (00:00:00) - Intro
  • (00:01:47) - Where the Digital Denture Started
  • (00:03:23) - Scanning and Reproducing Dentures Digitally
  • (00:06:00) - Developing AvaDent & The First Digital Denture
  • (00:11:01) - Solving Digital Denture Record Taking
  • (00:14:22) - Reinventing the Denture Workflow
  • (00:21:54) - The Future of Full-Mouth Rehabilitation
  • (00:24:00) - AI, exocad, & the Future of Dental Design
  • (00:33:14) - How to Get Started With Digital Dentures
  • (00:35:05) - Conclusion
View Full Transcript

Episode Transcript

[00:06 - 00:28] Rob: You're listening to The Evolution of Dental podcast, sharing the stories of the people and the technology reshaping the world of ministry. I'm your host, Rob Norton. This podcast is produced by Evolution Dental Science as part of our educational outreach program. It is our goal to share with you the most cutting edge technology and fascinating collaborators that we work with on a daily basis. [00:28 - 00:52] Rob: I personally have been teaching dental professionals CAD Cam technology for nearly 15 years now, and is my passion and my pleasure to share with you all the latest and greatest in the world of dentistry. Today I'm joined by Andy Jackson, who is responsible for completely reshaping the how we think about dentures for more than a decade. Dentures were the last holdout in the analog dentistry world. [00:52 - 01:09] Rob: Messy impressions. Multiple appointments. Unpredictable fits. Then in 2011, a company called avoidant, co-founded by today's guest Andy Jackson, changed that conversation forever. And what made you first think that dentures could even be digital here? [01:09 - 01:41] Andy: So thanks a lot for obviously doing this podcast and this subject matter. Obviously, you know, it's pretty deep to my to my heart to think about dentures being digital. I think everything can be digital today. So it's really a workflow and a process that has to be fine tuned. So it was just a matter of creating the right workflows and procedures in place to get the records necessary that are that are necessary for full month rehab. [01:41 - 01:46] Rob: Where did you start? What was your first step to begin? The world of digital enters. [01:46 - 02:07] Andy: Quite honestly, I mean, it was really a passion of mine at a certain point. I worked for a Imtech Corporation with Doctor Ron Bullard and Tim Thompson. They both at a certain point owned it, and they had a meeting basically, that they would code, that they would ask everybody to present the largest problem that they had in dentistry. [02:07 - 02:39] Andy: And mine was dentures. Based off of the idea that I was on a lab for approximately 20 years at that time, and maybe even 20 about 20 years, and then presented this problem that dentures were very ill fitting, unpredictable, and so on and so forth, all the things that we have. My sister was a nurse and still is about 40 years in a nursing home, and she presented me with problems of nursing, home dentistry and obviously missing dentures inside of that arena. [02:39 - 03:10] Andy: And the vision was always that once we make a digital product, it's very easy to reproduce. And so that's kind of where I would say those two catalysts is what kind of gave me the passion for for dentures. And, you know, I was very privileged to be working with approximately 60 nursing homes and saw that need, tremendous need at a certain point. [03:10 - 03:17] Andy: And, you know, that just accelerated my enthusiasm for digital dentistry. [03:17 - 03:23] Rob: So you'd say the repeatability of it is where digital dentures started. [03:23 - 03:45] Andy: Yeah. I think the idea of, you know, a simple, simple at that point. Right. Because we didn't have all these tools. So at that point, you know, I had a I had a box scanner and it was the idea of taking somebody's dentures, scanning it and just being able to 3D print it or even mail it at a certain point and just having dentures that, that these patients can have. [03:45 - 04:07] Andy: Usually a nursing home patient has to wait somewhere between two, two months to sometimes up to six months for a denture. Dentists are required in New York State. I need to come to nursing home practices twice a month, and quite honestly, the denture appointments are not taking priority. These patients are in the liquid diets for that period of time. [04:07 - 04:26] Andy: So what I thought of was like, if we could scan the denture and then take that file and just reproduce it, I don't care what the esthetics are like, as long as people can eat, that would serve in its own own self as a as a viable prosthetic for mastication. Right? [04:26 - 04:44] Rob: Absolutely fascinating, very human driven story. So what would you say your initial bottleneck would be with pulling these, knowing these dentures into the digital workspace like you have, you said a single box scanner. Obviously we didn't have oral scanners back then. [04:44 - 05:05] Andy: We did. We had internal scanners, but we just didn't have the ones that we have today. Right. Today, insurance scanners replaced box scanners. At that time, you had one focal point which allowed you to do basically a 360 both sides separately and then stitch it together in a, in a software and then created the denture. Today scanners you could use any almost any internal scanner. [05:05 - 05:29] Andy: We present the solution from Allied Star. But you know our allied star can scan faster than we did. So at that time, what I would say to you to answer your question, you know, what was what was what was the difficulty? It just kind of convincing people that this is possible and that, you know, that we can basically drive esthetics and the design of the denture from that perspective. [05:29 - 06:03] Andy: You know, I got, you know, I could go into the whole story of how we got started. But, you know, I had Ron Jarvis, Doctor Ron Jarvis, I'm on a world renowned. And my partners, you know, ten Thompson Shawn Group and Scott Keating and you know so so they they were very excited. And you know, I remember sitting in front of a room with basically, you know, 15 docking degrees among the four of them and me, a guy that, you know, didn't even graduate college from a perspective of going into the dental lab space. [06:03 - 06:36] Andy: And I'm sitting there teaching these guys about dentures. But we sat there, we talked about everything and, and then started going about how to solve it by doing a tremendous amount of research on occlusion. And that occlusion algorithm is really what drove the first digital denture software, which is Avenue, you know, and we really drove that pretty hard for about 2 or 3 years. [06:36 - 07:03] Andy: Had a colleague of ours that's still working with me, Colin Monti, that actually worked really side by side with me. We made the first digital denture here in Buffalo, New York. You know, we were in Buffalo for almost a year, year and a half, and then moved to Arizona in Scottsdale, where Aberdeen is today. And, you know, so at that point they you know, I just chose to basically separate. [07:03 - 07:30] Andy: And they went their way and I went my way. And this is what we basically came back to Buffalo and started, you know, started evolve help. So CAD and they helped us obviously. But we certainly were at that point the experts in and digital dentures, and they were certainly the experts in everything else. And we understood their software, they understood us and we just helped them. [07:30 - 07:43] Andy: You know, 15 years later, you've got, you know, extra cad the way it is. And it's in my opinion, you know, the most robust software out there that can handle everything from full mount to single units. [07:43 - 08:05] Rob: Absolutely. Absolutely. So you going from a box scanner of a existing patient venture to the first denture. What was that like? So how did. Obviously we didn't have 3D printers with that or as adept at production as we have today. How did how did you decide to take that and bring that into reality from a digital scan? [08:05 - 08:30] Andy: So once again, I had some awesome partners, right? So Shawn Grubb, which was the basically the mechanical engineer in the group, really went out and researched all the mills out there. I looked at a company called Robo Camp. He felt that that machine was the best machine for milling PMA, PMMa, as you know, obviously it's a very difficult product to mill. [08:30 - 08:49] Andy: You have to watch your speed so you don't burn it. You have to watch, you know the rest of this so you don't rip it out because it's very aggressive, very hard. So there was a lot of factors that we needed to do, but before that we needed to create our own puck. So we ended up engineering a way to basically create the chemistry and the puck. [08:49 - 09:10] Andy: You know, it's an actual thermic reaction. So that actual thermic reaction in the beginning burned a lot of pucks, because when you put enough material ties together, the inside burns. So we had to learn on how to cool that, create the process, create the the pressure points. And we did a bunch of research on on all of that. [09:10 - 09:40] Andy: And then we created the ability to basically manufacture and create our epoxy and to tell you we we did an incredible job, and it was something that was manufactured by my cousin Teddy that basically learned the procedure inside and out and was making all the pucks for evident. We also had at a certain point, we realized that we wanted to mill not only the base because we were putting teeth in it. [09:40 - 09:59] Andy: You know, we were using basically iron Claire's blue line teeth and milling the pocket and then putting the pockets one by one post, curing that. And that's how we set the first ventures and milling pockets and taking denture teeth and putting them in their one by one on every denture that we were hoping that we would get in the house. [09:59 - 10:30] Andy: We were losing money, but we continued the fight, and then we wanted to basically create a process that we would we would have mill teeth. So what we did is we actually milled a patent. It's a you could read it, but basically what it is is you milled a whole whole tooth in the pocket all in one, and then you backfill it with, with acrylic and then you mill again and incisal and then you backfill that within sisal. [10:30 - 10:58] Andy: And then, and then you milled a whole denture again. So it was a three step process of getting to the final product being all in one with basically 100% accuracy. So that's, that's basically the manufacturing part of the of the dentures is, is and has been solved for a very long time. I think we're we're struggling today and have always struggled as really in the record taking. [10:58 - 11:01] Rob: Can you speak more to the record taking. [11:01 - 11:22] Andy: Yeah. So we, we, we you know, Doctor Jarvis and myself created something called the Achmed. It's an anatomical measuring device that we allowed the community to kind of look at. And it was a way to capture the only record that you have. And that's basically a Gothic art tracing. So we would have this here in the right position. [11:22 - 11:50] Andy: And then from there, once you have that Gothic art tracer in the right position, we we stabilized the pen and then allowed the, the dentist to open up the video to basically what, the little screwdriver to open up the bow, the pen to where, where they felt the muscular component of the face was proper. That was our way of getting and then stabilized all that through like a blue moose bite or registration. [11:50 - 12:19] Andy: And then from there we took that and scanned that three 360 again and, and did our best fit to the soft tissue of the final impression and created the video and CRPS movements from that. And that's where we got basically in the first appointment. You got all of your records, right? So the whole idea is changing everybody's mind from how many appointments you need to capture those records. [12:19 - 12:47] Andy: It was changing a mindset, changing, you know, the workflow for, for for doctors, you know, dentists tend to feel like they could correct dentures on the next appointment. But you know, when, when, when you have that mindset, that's where that's where we went around. I went around to about 45 different colleges and try to present it as a solution that we would teach dentures this way for a digital venture process. [12:47 - 13:13] Andy: But we were just trying to get to a position of making people understand. That said, you bunches are here because of of the ability for us to do that. You know, Doctor Steve Wagner created the Wagner tree, which was a it was a gutter percha tree that basically gave some esthetics and ability to to create that and that process. [13:13 - 13:37] Andy: We also we were the first ones to use thermoplastic trays where we would take stock trays and we had a series of ten different stock trays, and you would pick the size of the patient arch and then put that in the hot water and basically create a custom tray for yourself. So that allowed us to basically accelerate that process. [13:37 - 14:01] Andy: But as I mentioned to you now, that's always been the challenge. This is a very difficult record. And even though I've done hundreds of them, they're difficult every single time because for different reasons, you know, and I think that's the hurdle that needs to be corrected. And that's really what we're working on, is how to simplify that record taking process. [14:01 - 14:22] Rob: So you had to not only invent a workflow for this, but you had to invent materials and then select machines that could be compatible with these materials and then workflows to work with those machines and then work close to take records. How was that? I know you said you went around to you said like 45 colleges, something like that. [14:22 - 14:48] Andy: Put it this way. I became a I became a frequent flier on two airlines and and let's just say Mrs. Jackson was not very happy with me. I had my son was a senior in high school, so I kind of sucked that I missed that. But, you know, when something hasn't changed in that many years, you have to reinvent the wheel 100%. [14:48 - 15:14] Andy: You know, it's really about looking at it from a solution based record, solution based process. And remember, I had engineers in my ear all day long about this is what we need. They don't want to a variance of 100 micron. And I would laugh because I'd be like, well, I'll just give them a little more salt that day or something. [15:14 - 15:57] Andy: So yeah. So the inventions of the Amb and the inventions of, let's call it these processes, came directly from the collaboration between engineers and technicians and say this is what the community accepts as records. And this is what the engineers said. This is what we need as records. And so we basically created this process together. The, the the you know, what what I, you know, as a technician, custom trades was was a norm for us to make for dentures, as we all know. [15:57 - 16:22] Andy: And so, you know, when I saw the thermoplastics and then we made them into trays and I said we could sculpt these with basically we made it to the equal. The cure was coming out. So the water is like 170 degrees. So we made it basically melt at that water. So we would just by people Keurig. Then they could have that water to melt the pot. [16:22 - 16:23] Rob: Clever work around. [16:23 - 16:40] Andy: Well I mean we could have made the temperature anything we wanted. We wanted to make sure it was, you know, we didn't want to sell them a water heater. So we basically set back by a make some coffee and then do that. So you know that that, you know, so when we started doing. [16:40 - 16:43] Rob: Make sure that makes it very accessible. [16:43 - 17:05] Andy: Well, you know that those are type of things that, you know, you've got to you know, I think that's the business side of us. Right? That was Tim Thompson. And and I would consider myself in that, in that like the business side of how do we make this, you know, also like it's great to have all these tools and have people by thousands of dollars of our stuff. [17:05 - 17:32] Andy: But realistically, how do we have them by $1,000 worth of our stuff and still be able to create these records, you know, so so that was kind of the idea behind, you know, some of this invention, as you said, you know, the idea of, you know, how do we solve the problem with basically the least resistance and also 100% the problem solution? [17:32 - 17:52] Rob: Because in the final analysis, it still has to be very approachable if you're going to be serving serving nursing homes, where, let's be honest, the the skill set for most of the people assisting there is not typically the level that you get at chair side or high end dentist. Certainly not a technology center and not engineers on staff. [17:52 - 18:17] Andy: Yeah, no, I would say that. But let me just say a different way, because some of the greatest people that I've met in dentistry worked for nursing homes. These people are just super caring. They are, you know, they're not money driven. If they were, they wouldn't be in the nursing home. They are the most compassionate people, and they really put their hearts into the job. [18:17 - 18:44] Andy: So when we came up with this solution in some of the nursing home dentists that we worked with, you know, they were absolutely esthetic about about the solution. The problem has always been the manufacturing of the doctor was very expensive at that time because we all we did is, is milled them at that time. And as I mentioned to you, there was a three step process so evident. [18:44 - 19:17] Andy: Lost money on every denture at $450, you know, and and that that is not a scalable process. Now we all knew as partners that 3D printing is coming along and where it is today. And and quite honestly, you know, also milling has come along and you know, you've got, you know, the the evolution pucks that basically, you know, have the, the, the, the, the tissue and the Keith inside of them, which is a nice solution for Miller processes. [19:17 - 19:52] Andy: And there's other solutions out there that I also do that. But you know, I mean milling dentures is absolutely, you know, let's say the, the the highest standard care that you can melt. Is it necessary? Absolutely not. I think that there today there's tremendous 3D printers out there. That mill I mean that print. Sorry about that. That print dentures very close to what a three 3D milled denture would be. [19:52 - 20:25] Andy: They're not still there, the same chemistry, but they are very close to what they are, what what we are expecting of them. And that's really the porosity for the see Albertans is incredible in a in a properly cured acrylic puck and also the fittest 1 to 1 to the mill. So you know, it's and I would say to you that where the fit is therefore 3D printing not 100% there's unarguable it's there. [20:25 - 20:58] Andy: And as far as the porosity, if you're using the right chemistries, you absolutely have incredible chemistry that allows you to to keep the theatrical flow. And also we are going to be introducing a, a powder that you can add to any 3D printed material that basically eliminates any bacteria growth inside of there. And that will be basically introduced within the next 6 to 8 months that we are working with University of Buffalo on. [20:58 - 21:22] Andy: And, and that that powder will be utilized for obviously anything that is like a full three ab after surgery type of approach or for dentures or for any type of healing, specifically for things like immediate dentures that are that we're looking to to create better healing approach for for soft tissue. [21:22 - 21:50] Rob: That's very exciting. That's very exciting. It is. I would you how would you compare, say, the results you were getting from Aberdeen to some of the like, what the techniques are within Evolution Dental today and what are you most excited about on the horizon? Obviously the the, the powder you were just discussing is very exciting. But as far as like the new manufacturing techniques, newer software, I mean, you had to pioneer a software from scratch for evidence. [21:50 - 21:55] Rob: So there's a lot of stuff on the horizon. What are you excited about? [21:55 - 22:25] Andy: I think the things that make me be excited in the in the full month rehab world is first and foremost, it's full mouth rehab. It's no longer just doctors, right. So if you're talking if you're talking dentures, you're talking dentures on on on implants. Because that, that that for a digital technician there's no difference in making a denture and a full multi have restoration. [22:25 - 23:04] Andy: You just got to learn how to implant parts and so on and so forth. And obviously there's there's different things but but in the form of real world. What I'm really if you're asking me what I'm really excited about, you know to me there's a couple of advancements that are happening in our industry. You know, Bite Finder, it's basically a software that uses patients where facets and creates basically fully functional occlusion, you know, bilateral occlusion that, that that uses the patient's existing with. [23:05 - 23:34] Andy: That's or if you created a, a denture that they would create within a short period of time, there's ways of creating that process to, to accelerate the patient's bite and knowing where everything is. So I'm really excited about solving finally the bite problem in the in the industry. And I think Bite Finder will absolutely do that because we've distributed all the other jaw tracking devices. [23:34 - 23:59] Andy: They're all really nice, but they're very complex to work with and to, to, you know, they they do their job. They're just too complex, in my opinion, for the apple to to appreciate the value of that and spend that time chair side to getting that. So with Bite Finder, you don't really have to do anything except take a really nice full upper and lower scan. [23:59 - 24:40] Andy: So, so that, you know, bite finder excites me to tell you the truth. What? Yeah. You know, and then what I really like is, you know, as you know, this day and age information is, is critical to everything, right? So getting these scans and putting everything together, you know, and I, you know, great labs is doing an incredible job creating a process in my opinion, to merge all of this data together and utilize everybody's strengths and creating APIs to to work with, with. [24:40 - 25:08] Andy: All the different softwares out there to basically create a streamlined approach. So all of this data isn't everywhere and you're wondering where it is. So to me, I think that's exciting. The AI is absolutely exciting to me. And you know, AI is so overused, right? Actual CAD hey, had AI right from the beginning actually using the patient's existing dentition to give you a little bit better design than just the proposed design. [25:08 - 25:39] Andy: But, you know, with that being said, you know, actual CAD is working on their full AI approach towards, you know, obviously it all starts with simple problems. But I you know, the complexities really get me excited if there will be days where they could there will be a day that they can absolutely, you know, present a full solution for, let's say, a full mouth or for veneer case or esthetic case or so on and so forth. [25:39 - 26:04] Andy: If we put in the right information in there and, you know, that kind of excites me because it allows our technicians to really, you know, take their skill sets of what they know. What we will do in United States is create a lot more jobs with this type of approach, with our technicians, because there's so much going overseas that really shouldn't be. [26:04 - 26:37] Andy: And quite honestly, what we need to do in the United States is look at the ways that we could use these tools to be competitive against or against or with the as competitive as the overseas manufacturers. And we have other ways that we could be way more competitive, and we just have to be open to that. And I think that excites me to have AI assist there for our technicians to finalize restoration, understand what we need. [26:37 - 27:07] Andy: And they have all these other tools like Byte Finder and and basically great lab putting it all together and allowing us to basically utilize all these strengths together. That's what it does to me, is the collaboration of all of these tools together. As long as people are open to creating, creating the the evolution or they evolve of their of their process inside of. [27:07 - 27:16] Rob: Sounds like you are not worried about AI taking jobs much as you are saying, AI is going to create new opportunities for good technicians. [27:16 - 27:37] Andy: My lab will do three times the amount of volume in the same amount of space, and I can't wait for it in the next 3 to 5 years. So am I worried about that? Absolutely not. I think the people that should be worried, and if there is people worried, should be the people that are over there sending their stuff overseas. [27:37 - 28:03] Andy: Because I really believe that that that is that is where we need to. I'm not here to compete with the United States labs. You know, we've never lost. We never lost an account to a to a dental library. We lost an account to ourselves. We didn't we didn't treat them properly. We didn't do something right. And when you lose an account, you have to look at your inside and your internal process of what you did to for that account. [28:03 - 28:35] Andy: If you think that they left you for $5 a unit your way, mistaking you're you're you're not in the right place. What you need to do is really look at what value props you're presenting to your customer base, and then utilize technology and the skill sets of your technicians to basically get more value than our competition. And I think that's the reality of of where we are is, you know, you know, you look at AI and you know, my partner JJ. [28:35 - 28:58] Andy: The last two legal E's that we had, he did AI letters to our customer base and to not our customer base. I'm sorry to our people that we had our disputes with. And you know, he gave them to our lawyers and lawyer said these were as good as I could write him. You know, he could have he could have been upset about that. [28:58 - 29:23] Andy: But, you know, the reality is, you know, if he knows that we're we need him for bigger things, you know, and for growth and so on and so forth. And if we can handle these small little disputes properly with AI, you know, that basically is something the same way that we are looking at what we do for our, our, our doctors, you know, we expect our doctors to internalize some of their production. [29:23 - 29:49] Andy: Why wouldn't they? I would hope that they would. And really that's why we created evolve around is evolve was created really for for doctors that want to create a in their process. And we are here to help them. And by the way, we only present solutions that we use every day. So we're not here telling people, you know, go use this or this printer and we're not using it. [29:49 - 30:16] Andy: We don't even present that as a solution. The only solutions that we could present on is the ones that we're using. And I open and I open this really to any laboratory that is out there. If you are a specialist in the product that you're that you have, you should you should start distributing that product. You know, there are other labs that need your assistance on how to use it, and there are other dentists and professionals that need your assistance on how to use it. [30:16 - 30:46] Andy: This is a very simple model, and quite honestly, it's our relationships that we need to, you know, accelerate and help. You have to be in a resource to your dentist in a different way today than you were a resource for, you know, when we were when we started in 1990 with emperors, at that time, our resource was our knowledge and our understanding of bonding and understanding of prepping and so on and so forth. [30:46 - 31:15] Andy: You know, today's resource is totally different. It's digital, it's workflows. It's, you know, it's machinery. It's, you know, chemistries still. But, you know, those are the type of things that I think that we can create value for our customers and, and help them, quite honestly, achieve some of the products that we use to make for them inside of their product, inside of their dental practices, simply to help one offset some of their costs. [31:15 - 31:28] Andy: Running a practice is extremely difficult. Also, they have a lot of challenges that we quite honestly don't think of. And and I think we are here to present, try to help present some of those solutions for them. [31:28 - 31:48] Rob: So very future forward facing. And it sounds like that in spite of technology changing over time, the the ethos is the same to to embrace it and move forward boldly with it and not be afraid to collaborate, but to share it with those that you work with. Is that does that sound right? [31:48 - 32:26] Andy: Well, Robert? Yes. And you know what I always love to say to people? I have three Ferraris. I used to be one. Now it's three Ferraris. Unfortunately, when you open those containers, they're all full of old dental equipment that we bought based off of the idea that we thought that was the greatest tool. And, you know, but you know that that is what these are the things that allowed us to continue to advance and continue to be on the cutting edge of what we feel we should be, where we have to be to continue to advance our laboratory to the next stage. [32:26 - 32:54] Andy: And we can't be afraid of, in my opinion, you can't be afraid of what is going to happen because it's going to happen, and you can't be afraid to fail because you will fail if you don't do anything. So the biggest failure has always been in my life is the failure of not trying something. Because when you try something, you absolutely have lessons that are extremely beautiful. [32:54 - 33:14] Rob: And one final thought how would you what would you say would be a good place to start? For those who are still skeptical at in 2025 of the digital denture, where where do you think they should begin to step into this field, either for a lab technician or a doctor? [33:14 - 33:22] Andy: Well, if you're skeptical as a lab technician, get the over it. [33:22 - 33:51] Andy: Like, come on, stop. Just stop. Just embrace it. Go for it. As a dentist, I would say very simply this you should go to the place where you're going to give the laboratory the best record. So to me, the simplest record to give to the lab, I'm talking about the ideal case. To start with, there's enough teeth that you've got a doctor position, you've got the patient in a half decent position. [33:51 - 34:21] Andy: You're going to be extracting a whole bunch of teeth. That's the best place to start. Take a full scan of that upper and lower. Try to capture as much soft tissue as you can all the way around it, and then send that to your lab, let them extract it, let them do their reduction the way they normally would do it in a cast bike, and then let them basically present you with a solution of a digital denture that is that is reliable. [34:21 - 35:01] Andy: So they just have to know which material science can be realigned. And then that that would be a perfect position for, for a start of a digital denture. The beauty about that, just so you know, Robert, and I'm sure you do, is that the laboratory never loses that record. So what it allows them to do is, is basically create the final denture very easily also, because then all you would have to do is rescan that done after you do washing it, and basically present that as the solution for the final denture. [35:01 - 35:05] Rob: Excellent, Andy, thank you so much for your time today. [35:05 - 35:08] Andy: Anytime you know that. [35:08 - 35:11] Rob: It is on. [35:11 - 35:18] Andy: All right. Well thank you everybody. Appreciate you guys. And I just had one more thing to say. Go bills. [35:18 - 35:19] Rob: Go bills.

Other Episodes