Episode 49

November 20, 2026

00:35:32

Rethinking Healing Abutments in Implant Dentistry | Hardy Saliba | EODP #49

Hosted by

Robert Norton

Show Notes

What if the emergence profile of an implant restoration could be planned before the tissue even begins to heal? Hardy Saliba, founder of Force Milling, joins Rob Norton to discuss his journey from traditional dental ceramics to advanced titanium milling and digital implant workflows. With more than 30 years of experience in dental technology, Hardy shares the challenges of building a milling center, navigating open CAD/CAM systems, and developing a semi-custom titanium healing abutment workflow designed to give surgeons greater control over tissue contours before the restorative phase.

They discuss how exocad, implant library selection, and collaboration between surgeons, restorative dentists, and dental laboratories can influence the efficiency of implant restoration workflows.

Hardy also shares how his partnership with Evolution Dental Science helped support his CAD design process, why ongoing education is essential for dental technicians, and how his team's creativity continues to shape his business.

Learn more about Evolve Dentistry: https://evolvedentistry.com/

Subscribe to our weekly newsletter: https://www.evolutionofdental.com/

Visual Credits & References

Scientific References — Figure Attribution Pending

Chapters

  • (00:00:00) - Introduction
  • (00:02:16) - From Ceramics to Digital Milling
  • (00:05:19) - Building Force Milling
  • (00:08:36) - OEM Components and Open CAD/CAM Systems
  • (00:11:06) - Implant Libraries and exocad Workflows
  • (00:13:19) - Semi-Custom Titanium Healing Abutments
  • (00:21:36) - Working with Evolve Dentistry
  • (00:23:29) - Training and Building a Dental Lab Team
  • (00:27:27) - A Batting Cage Inside a Dental Lab?
  • (00:31:41) - Advice for the Next Generation
View Full Transcript

Episode Transcript

00:00:00:01 - 00:00:06:08 Rob One of the things I have not heard from any other laboratory is having a batting cage in house. 00:00:06:13 - 00:00:13:22 Hardy Yes, absolutely. I've hit about every pothole along the way possible. It's been a learning experience. 00:00:13:34 - 00:00:18:37 Rob Sometimes open means open to letting you make horrible, expensive mistakes. 00:00:18:51 - 00:00:40:56 Hardy And I can't tell you how many times. You know, my my guys have come up with something better than I have. So, I'm. I'm very thankful for them. And and blessed to have them. 00:00:41:01 - 00:01:00:15 Rob Welcome back to the Evolution of Dental Podcast. Brought to you by Evolution Dental Science. The stories of the people and the technology shaping the world of ministry. I'm your host, Rob Norton. And today's guest started as a ceramist in Winston-Salem and then built a milling center while the rest of the world was consolidating into a handful of giants. 00:01:00:20 - 00:01:11:20 Rob He's also one of the sharpest problem solvers I get to work with, and the only lab owner I know with an in-house batting cage, Harry Saliba. Welcome to the evolution of Nil podcast. How are you today? 00:01:11:25 - 00:01:15:22 Hardy I'm good. Thank you guys for having me I appreciate it. Looking forward to being here. 00:01:15:27 - 00:01:23:18 Rob Thank you for coming on. And so as I understand, you started as a ceramist in a lab, like, what, 33 years? Is that right? 00:01:23:22 - 00:01:50:27 Hardy It's been 30 years ago. Yeah. I went to school in Utah with John Archibald. One of my favorite people in the world. It's been a while since I've seen or talked with him. I'd love to love to see him again. And I've. I was in house after I graduated from from law school. I was in house with my father, who was a dentist, and that was in Oklahoma for a while. 00:01:50:32 - 00:02:13:22 Hardy Then I, I moved out to California, opened up a lab in California, and then I ended up selling that and moving. My family was in North Carolina, so I wanted to be have we had children? So I wanted to be close to close to family. So about 16 years ago, I guess it was I opened a lab in North Carolina and went to Salem here. 00:02:13:22 - 00:02:16:44 Hardy It's been great ride. So North Carolina's been good to me. 00:02:16:49 - 00:02:24:22 Rob So there's a big difference between opening a lab and a milling center and being a ceramist. What what inspired that shift? 00:02:24:27 - 00:02:50:18 Hardy For sure. There's a there's a definitely a big difference. Yeah. I mean, my I'm a I guess you'd call me a dinosaur. You know, everything was done by hand. Hand waxed back in the day where he waxed to the right through the implant itself and with ceramics. That was that was my. That was my background. You know, high end ceramics is. 00:02:50:22 - 00:03:16:20 Hardy Is what? As that was my background. It was my love. But, you know, through the all the evolutions of of dentistry in the last 30 years, I've, I've seen, seen a, you know, there's just been so many changes. I've been milling since 2001, and I've gone through a lot of different systems, you know, CAD, Cam systems throughout the years. 00:03:16:25 - 00:03:39:03 Hardy I've watched it change. I guess what led me to a milling center was there's a lot of a lot of headaches and a lot of things that we we go through as a lab that, are difficult. And, and I wanted I kind of about four years ago, 4 or 5 years ago, it was right about the time of Covid. 00:03:39:03 - 00:04:06:27 Hardy I started thinking, what are all of the things that are are frustrations with going through the whole process of of implant dentistry as a lab. One of the things I wanted to be able to do was I wanted to be able to mil OEM custom abutments, you know, at the time, I had no clue if that was even a possibility of being able to do that in house, you know? 00:04:06:27 - 00:04:36:49 Hardy So I just kind of started exploring that. I'm very blessed to to have had a great, a great start and a great relationship with them. And I'm very, very thankful. And so but what that is allowed me to do is to. It started out I didn't have this big plan of going to the masses, to be honest with you, when I first started, it was just like, let's kind of explore this idea and see where kind of where it leads. 00:04:36:49 - 00:04:38:25 Hardy And for myself. 00:04:38:34 - 00:04:43:42 Rob The round up all the headaches in the world and combine them into one big problem. Yeah. 00:04:43:46 - 00:05:06:25 Hardy Pretty much, you know, I was just, you know, you think, oh, well, you know, we're we're going to just start milling abutments and, there's, there's just a lot of a lot of things that you have no idea when you're first starting that you're getting into just the whole setup of the cases to the from the design to the milling. 00:05:06:27 - 00:05:18:58 Hardy What are the, you know, the validations, you know, just just really all the way through the process and learning. Milling titanium is different than milling zirconia just by a long, long ways. 00:05:19:01 - 00:05:27:01 Rob So when you started force milling, was that like your primary focus is you're like, I just want to mill titanium and then move outward from there. 00:05:27:06 - 00:05:56:32 Hardy Yeah. That was that was kind of, I guess when I first started I with it, that was the that was the, the beginning. And I milled for myself and I milled for a few friends. I really kind of just wanted a, a soft opening, I guess you would call it in outsource to myself out have friends that are going to be patient with me while I'm learning the process, and I've hit about every pothole along the way possible. 00:05:56:37 - 00:06:28:30 Hardy So, you know, but it's it's been it's been a, a, a learning experience there just there's no what I, what I learned right away is, is there's there's no manual for it. There's there's no, this is how you do this. Instruction manual. So it's then a it's been a process of of learning along the way, but yeah, it's force milling was a, you know, it was just kind of an idea at first. 00:06:28:30 - 00:07:01:13 Hardy And it's it's just evolved through and become something else now. And, and it was originally titanium. But we, we really produce full service as far as implant dentistry from abutments to crown and bridge. And so we're able to, you know, work directly with doctors, which I really, really am excited about. You know, I love working with laps and we still do that, but I also enjoy working with surgeons and GPS. 00:07:01:20 - 00:07:25:18 Hardy My dad said, GP and it's, it's I've learned a ton from him. But but yeah. So that's you know, titanium. We mill cobalt chrome when a lot of a lot of other products as well. We just have a, a lot of, a lot of mills that are have a, a big a large capacity. 00:07:25:22 - 00:07:30:30 Rob So yeah, not every lab needs a $100,000 multi puck set up. 00:07:30:34 - 00:07:55:25 Hardy No no it's no not everybody does I mean there's some there's some really great Mills honestly for smaller you know your boutique labs that want to know their own abutments anything. I mean there's some really good mills that are out there and they can achieve that just when they're in their own lab now, which is pretty cool. It's it's a neat thing for labs to be able to do that. 00:07:55:30 - 00:08:19:46 Rob Yeah, absolutely. Those little, the little titanium blanks that are out there now have made that so much more accessible to your common, you know, dental practice and your smaller labs using, like, you say, like a VHS or, you know, a all my machine or something like that. All these milling centers have been kind of consolidating into multi multi-million dollar businesses over the last decade and a half or so, especially in the last decade. 00:08:19:58 - 00:08:36:27 Rob I'm here at the VHF. If you're interested in bringing billing in-house or spanning your laboratories manufacturing capabilities, schedule a meeting with me. I'll personally walk me through the equipment, the workflow, and what you need successfully incorporated in your operation. Now back in show. 00:08:36:42 - 00:09:14:27 Hardy The OEM product was something I was very interested in, but I also some of the third party products that are out there are are really nice. Now they're there have gotten to be really, really good. Again, I've just been very blessed to have an opportunity with a lot of these companies and that have given me an opportunity and a chance to work with them, but it it was it was honestly, when I, when I decided to do it, it was kind of a, a moment where I knew there had to be a shift really dedicated to learning about it. 00:09:14:32 - 00:09:20:34 Hardy And, because there's, there's a learning curve, there's a, there's a big learning curve with it. 00:09:20:37 - 00:09:22:30 Rob And you said there's no manual. 00:09:22:34 - 00:09:53:06 Hardy No, there's just not and it's, it's, it's a, it's a lot of of trial and error. It's expensive. That's what I learned very quickly. This is expensive mistakes. But and that that goes with the mills themselves. Some of the mills that are out there are very automated. They are the ones that are automated, are more kind of closed systems a lot of times, which is nothing wrong with that. 00:09:53:10 - 00:10:13:01 Hardy It is they they are closed systems and they do a specific product pathway. The ones that are a little more open are, you know, you you can you can kind of do other things with which I, I like that. So but I have both in here and, you know. 00:10:13:03 - 00:10:27:39 Rob One of the things I've discovered along the way, I first off, I'm a huge advocate for open systems. But one of the things I kind of discovered along the way with my own, you know, history with labs and stuff, is that sometimes open means open to letting you make horrible, expensive mistakes. 00:10:27:44 - 00:10:30:10 Hardy Yeah, we've we've made a couple. 00:10:30:13 - 00:10:50:18 Rob So hey y'all, it's Robert with the Evolution of Dental podcast. If you love these stories and you want to see more guests, more content and help the show, please remember to share it. Like it? Subscribe to our channel and hit that little notification bell if you're watching on YouTube so you can get notified of our new episodes. New episodes drop every Friday. 00:10:50:22 - 00:11:06:08 Rob Follow us on all the socials. You'll see all the latest content. Looking forward to seeing you there. What's something that you wish that more people who sent you. Outsource to you? What's something that you wish more of them knew or understood about the workflow? 00:11:06:13 - 00:11:51:49 Hardy Really? I, I think it's really just learning about blanks. Like, let's just say if it's a blanks, I love blanks, but there's not really a label on a manual on which ones to choose and how to do your kit set up in three shape, or how to do your setup in exo CAD. And those are all difficulties that I get, because whenever they go through and they're selecting a blank, that's a small blank or a 11.5 instead of a 15.8 or a vice versa, it affects the the cam process on, on our site. 00:11:51:51 - 00:12:16:18 Hardy And I mean, we can still take it and work with it, but it slows everything down because we have to reconstruct it in the camp. And whether it's hybrid in or, or meal box or, or whatever else we're, we're using here. So exo CAD has a lot of Demi's, but also your companies had DMs that you go to their websites and they pull. 00:12:16:20 - 00:12:26:10 Hardy They're not all the same. It's the initial setup and execute is the most critical part of everything. If that's correct, it makes the whole workflow better. 00:12:26:15 - 00:12:30:42 Rob So is that what led you to adopt more Exo in-house? 00:12:30:46 - 00:13:03:42 Hardy Yes. I like how exo functions. You know, in this newest generation with a 3.3, I think is a huge step forward from the selection of the implant. Information is way easier to see and read than it used to be. Absolutely. I think that that has made things much, much better. And if they will continue, if X will continue to develop that aspect of it and to continue to simplify, people will take the path of least resistance. 00:13:03:42 - 00:13:19:20 Hardy And if there is a simple way to do it. That's the way they're going to take. And and it's been it's it's been a really good process. I like the direction that Exo cat's going for sure. 00:13:19:25 - 00:13:31:03 Rob One thing I think that you're doing with that is particularly interesting is these custom, custom healing abutments. Yeah. Can you tell can you tell me a little bit more about that? Like where did that idea come from. 00:13:31:08 - 00:13:57:10 Hardy As a lab? When we get a scan or an impression, the impression post or the scan body is is sticking up out of a tiny little hole, you know, it might be four millimeters deep, it might be two millimeters. We never know. But it might be a lingual on the ridge. But regardless of what is there, we are as a lab, we're expected to have this crown that looks like it's coming up out of the tissue, but we're not supposed to press on the tissue. 00:13:57:10 - 00:14:22:39 Hardy And so what I came up with was what I call semi-custom healing above. It's a true custom healing abutment would be from guided surgery for sites, something site specific. But this is something that I call a semi-custom healing above it, where the doctor dentist would have a opportunity to tell and give parameters ahead of time of saying, okay, what are our averages? 00:14:22:39 - 00:14:43:03 Hardy I'm I'm averaging. I'm shooting to have the implants, four millimeters below tissue. We want to start the the flare a two millimeters below tissue. And we want to get out to if it's a molar, we want to get out to 8mm or 7mm. And it needs to be this shape. What we do is we get those parameters. 00:14:43:03 - 00:15:19:37 Hardy I design an exo CAD a a shape, a custom. Basically, it's a custom abutment with margins that are about a good half millimeter to three quarters of millimeter above the tissue level. It's a titanium healing abutment that is mirror finished, as good as a product for tissue healing. It's not the the the ones that are printed or when you have resin or printed resins, or you have something milled or some of the peak products that are out there. 00:15:19:42 - 00:15:28:42 Hardy It's not that they're bad, it's just they do. They are porous and they harbor bacteria through the healing process. And so we're. 00:15:28:46 - 00:15:31:42 Rob Totally bio neutral and nothing grabs on to it. 00:15:31:46 - 00:15:54:03 Hardy Exactly. And and so so what happens is is the surgeon is going in. They do their surgery place them and then they, they they suture around it. And then the patient goes home with that. And so the tissue heals to that product and so heals to it. And so when they come back at stabilization. 00:15:54:08 - 00:15:55:46 Rob Beautiful emergent profile, they're. 00:15:55:51 - 00:15:57:27 Hardy Exactly. 00:15:57:32 - 00:15:58:51 Rob Ahead of the problem. 00:15:58:56 - 00:16:31:44 Hardy Exactly. So then so your lab when when they're sending to their labs, it's it's just really super, super simple. They they can put their their scan bodies in and scan the scan the site. They can put the encode abutment in or, you know, healing abutment in at the time of stabilization scan that send that off. And it's it's a really easy solution at that point when the custom abutment is made and a crown, it's already there. 00:16:31:51 - 00:16:50:32 Hardy You know, a lot of times we over as a lab, we overshoot a little bit on the depth of the buccal, the facial margins, because we don't want recession, we don't want it. We're going to push on. That takes you a little bit facially and it's going to recede just a little bit. Well we don't want that junction to show you know. 00:16:50:34 - 00:17:12:22 Hardy So it's nice because that's all done ahead of time. And you know obviously guided if you're doing that and you can have these things these things made that way that's that's great. That's awesome. And we can do that too. But this is a product that the surgeons can have and they can actually have a say in the design. 00:17:12:34 - 00:17:26:44 Hardy And then we just save those parameters. And then when they want to order them they just say, hey, I need 25 of these or 50 of these. And we produce them and they have them on hand ready for for their next surgery. 00:17:26:49 - 00:17:31:20 Rob That's fantastic. So what's the reception bit on line like for this? 00:17:31:25 - 00:18:20:39 Hardy It's been really good. I've, been very thankful to my surgeons that I've worked with for the trials, that we've gone through and, you know, to, to, to test them out and, and it's been I've had a great success. It's been a, it's a product that I'm really excited about. It's something that I believe is, is going to help labs and doctors and it really and this is what I when I talk to I was talking to one of my surgeons and he said one of the things he likes about it so much is it just it makes the relationship between him, the GP and the lab just better because there's no, you 00:18:20:39 - 00:18:43:18 Hardy know, they're not pushing on tissue. They're not they know what that is going to look like. And the patients are, are, are accepting it. And you know, way better because they're not in pain. So, you know, they're not having it, they're not having to get, you know, numb for this. And, and so, yeah, it's it's. 00:18:43:18 - 00:18:53:08 Rob Been ages right from the very placing of the implant, right from the very beginning, you're setting the stage for a successful, easy passive seat. Yeah. 00:18:53:13 - 00:19:27:34 Hardy And yeah. And there's it's great because there's different, different ways that we can do this. We they can be engaging and not engaging. They can be. So you know, obviously when the surgeons are, you know, there's a stopping point for the surgeons when they're talking their, their implants. And so if you have a, a, a top shape to the top of your healing abutment, it's hard to predict that even with even with guided, it's almost impossible to say, okay, well, we're stopping here and this is what's going to happen. 00:19:27:39 - 00:19:34:30 Hardy So some in those instances having something non engaging is really nice because the surgeon can just go in and. 00:19:34:37 - 00:19:36:10 Rob Just tweak it as necessary. 00:19:36:15 - 00:19:52:39 Hardy Tweak it as necessary and, and heal from there. So it's a it's it's really nice. So I'm very I'm very excited about it. I think it's something I've, I've been I'm more excited about this and I haven't been anything in a long time. 00:19:52:39 - 00:20:08:51 Rob So yeah, I think a lot of labs on the other side will feel blessed to have that nice emergence profile to whether, you know, whether they're working with this or not, like just to to be able to go and just click along the inside of the tissue as opposed to having to invent the emergence profile. And I hope this is okay. 00:20:08:56 - 00:20:17:56 Rob I hope I'm not putting too much pressure here or, you know, the back and forth of that, because, I mean, this quickly turned into expensive, expensive debates, we'll call it. 00:20:17:58 - 00:20:36:22 Hardy And I mean, I know there are other solutions out there, but I, I think that it eliminates a lot of the headache. One of the things that, you know, doctors talk about is a, a two part talk, basically, you know, they go in and they get if they if they talk it all at once, they're going to get a false, false or false talk. 00:20:36:25 - 00:20:58:30 Hardy They're going to get a false reading because the tissue pushback, and this this really eliminates that. So the need for that which is, is is pretty nice. So, they're able to just, you know, you know, get right to it. And and it saves, saves time. That's the other thing is, is it on the they don't have to wait for that tissue to adapt. 00:20:58:30 - 00:21:23:32 Hardy They don't have to make the incisions. They don't have to do the the surgery at the time. They've already done their work, you know. So it's nice to have that just done ahead of time. Everybody has a little bit different approach. And so I wanted something that was easy to manipulate. CAD has I've come up with a system which you actually had a part in that. 00:21:23:32 - 00:21:36:56 Hardy So I appreciate that. So but yeah, we've got a system that is, is is really nice with being able to work within exo CAD and come up with a solution for it. 00:21:36:56 - 00:21:58:34 Rob So how did you end up being connected with with us here at evolve? Because I know how we got connected. So I got I got an email from Beth saying, hey, Hardy, this guy in North Carolina has this thing he's trying to do. I don't understand it. Can you call him? And, you know, we we started working on this, this custom abutment, custom healing abutment project that you had in mind, which again, I think is such a cool idea. 00:21:58:44 - 00:22:03:18 Rob But what what led you to start working with us as opposed to anyone else? 00:22:03:22 - 00:22:26:37 Hardy I'll I'll be on honest with you. You know, I was I was at a, I, I actually overheard people talking about evolve. I was at an event, and I overheard people talking, and so I just asked about it. So it was really kind of a word of mouth thing. And so I got back, I remembered, you know, them saying that, you know. 00:22:26:39 - 00:22:49:15 Hardy Yeah, you got a call Evolve Dentistry. You got to call evolve. And they're they're the ones that will they can help you out. And I'm glad I did. You know, you guys have, you know, all the way from just how XO cat is set up in my and, you know, in my system to the making it user friendly, more user friendly. 00:22:49:20 - 00:23:18:39 Hardy And you know, and then the training that that is there, you know, I mean, I've been, I've been doing, you know, digital dentistry for since 2001, but every system is a little bit different. And there's a, you know, there's a lot of a lot of changes that have happened to. And on top of that, I've got employees that are, are really good at this, that I've, I've, but I, I like learning myself as well. 00:23:18:44 - 00:23:29:13 Hardy So, you guys have, have been, just terrific to work with. And I'm very blessed and thankful for you guys. So you guys do a great job. 00:23:29:18 - 00:23:49:32 Rob We're blessed to work with people like you. And speaking of, one of the things you mentioned there was, was your team. And having owned a milling center myself in the past, that's one of the hardest things to select is finding a team that not only will design well, but also design well for someone who isn't necessarily them in their own lab. 00:23:49:44 - 00:23:58:15 Rob What's the what's your process like for for selecting designers and technicians? And you know what? What do you do when you first hire? 00:23:58:20 - 00:24:29:56 Hardy Yeah. And that is that's tricky. That is tricky is I don't know that there's a, a, you know, a silver bullet to that. I think that, you know, everybody has a different experience. It's it's difficult sometimes for them to come from one system and go to another system. At first. But I think that, you know, the, the switch decks of cat has been really nice. 00:24:30:01 - 00:25:14:32 Hardy They've been, you know, most, most, most people have. They like to change, you know, once they get it, there's a lot more freedom within it, which I really, really like that. But as far as choosing people, it's it's tough. You always like, I'd love to have this ready made person. And, you know, they're out there, but they're they're all working for somebody, so they're all they're all busy, so which is great, but, you know, so I've, you know, a lot of it has been, you know, coming on learning and, you know, and just actually just jumping in and, and, and going through training or going through. 00:25:14:37 - 00:25:37:34 Hardy You know, the process themselves and, you know, so we, we try to have training in-house, here weekly, and to be able to do, you know, different things here and learn new procedures. And, everybody loves to learn and, and that's something I try to try to continue to challenge my people here. 00:25:37:34 - 00:25:46:06 Rob So it sounds like you sought out people who enjoy learning. And that's part of the mechanism for your success. Is that sound correct? 00:25:46:10 - 00:26:17:08 Hardy Yeah. Yeah, I would say that, you know, everybody here, you know, we we try to talk about, you know, you know, one of the things, you know, my my dad, he comes in and spends time in here, and as a dentist, you know, being around the, the here, you know, they get a chance to actually ask questions directly to a dentist that is like, you know, or they can show him a problem. 00:26:17:13 - 00:26:52:03 Hardy And he has a completely different insight to that. And, you know, so which is, is it's nice and being able to, you know, we do have a, you know, we encourage our, our technicians though to, to learn and and I try very hard to be very open to asking them. I mean, it's amazing how they will come up with something that I've no idea, you know, I mean, they come up with solutions and like, I didn't know you could even do that, you know. 00:26:52:06 - 00:27:20:39 Hardy So and that's I always I always encourage them to think, think creative and, you know, come up with new. Don't just don't just settle in this because this is how it's done it for this long. If you come up with another way, I'd love to hear about it, you know, and and I can't tell you how many times, you know, my, my guys have come up with something better than I have. 00:27:20:39 - 00:27:27:54 Hardy So, I'm, I'm very thankful for them. And, and, blessed to have them. So. 00:27:27:58 - 00:27:47:44 Rob Yeah. Leaning on the it's it's it's wonderful what a powerful team can do for, for an organization, you know, like leaning into and supporting their exploration and their creativity. Yes. Now, speaking of creativity, one of the things I have not heard from any other laboratory is having a batting cage in-house. 00:27:47:49 - 00:27:57:34 Hardy Yes, absolutely. I'll, I'll show you guys here and, Wow. So you guys can see what? 00:27:57:39 - 00:27:59:20 Rob It's not a small thing. 00:27:59:25 - 00:28:25:39 Hardy Oh, no. So you can see the milling center on the bottom floor there. We've got a bunch, you know, a whole bunch of mills and and benches and then up above and the mezzanine up there as the design center and, but then. Yep. And we have a batting cage, my son, it's private, so it's completely private, but you have a, a, a facility where my son comes in, and he we have other. 00:28:25:44 - 00:28:26:55 Hardy You know, you. 00:28:27:03 - 00:28:31:58 Rob Were telling me I was picturing, like, a little corridor. It's a whole setup. 00:28:32:03 - 00:28:55:54 Hardy Oh, it's a it's a setup. So. Yes, absolutely. So, very, very, when I, when I been here for, I guess about six years since, since the. Yeah. Right at the beginning of Covid. And, so it's been a, it's, it's been good. I mean, it's tough to find a place I, you know, my, I was spending spending $100 a day on batting cages. 00:28:55:54 - 00:29:18:08 Hardy So I, you know, I need to find something my son can, work out, and I can, you know, in the back, and then I can work in the front. That would save a lot of, you know, I'd probably pay for itself. So anyway, so it's been it's been really good. So, you know, it's it's good to have him in here and be able to watch his progress while I get a chance to work. 00:29:18:08 - 00:29:23:56 Rob So is it a, a break room feature for your lab tax? 00:29:24:01 - 00:29:46:32 Hardy So, you know, it's funny you say that because we, you know, we'll have we'll have people come in here that are, you know, there's there's a couple of times we've had, you know, we've had some college kid or somebody in here and and it's, it's fun to come in here and, and it's just, it's, you know, dentistry in itself is stressful. 00:29:46:39 - 00:30:08:06 Hardy You know, it's stressful. There's a lot of is a lot going on, you know, in your head and, and everybody's got a due date. And, but when you step out here and you actually see what's going on or if there's a, you know, a lesson going on or whatever or someone, you know, it's, the atmosphere is really it's really nice. 00:30:08:10 - 00:30:21:56 Hardy It's, you know, I whenever I'm, I'm on the phone, I'm usually pacing around the, around the cage, so I pretty much worn a pathway around it, so. 00:30:22:01 - 00:30:26:46 Rob That's, that's such a creative way. Creative way to use your space. Yeah. 00:30:26:54 - 00:30:27:37 Hardy It's it's. 00:30:27:37 - 00:30:34:18 Rob A forget that you can just do things. Yeah. You know, it's it's it's it's your space. You want a batting cage. There it is. 00:30:34:30 - 00:30:56:22 Hardy There it is, there it is. Yeah. I've actually, I've considered putting in a golf simulator in here and, you know, I don't know if I'd ever. I get people out of it is the problem, though, so they, But there's, there's actually we do have, like, you weren't able to see it, but there's over on one side. 00:30:56:27 - 00:31:15:56 Hardy There's actually a, you know, we have a weightlifting area and, you know, a whole it's a whole workout facility in here. And so they on their lunch breaks will go in there and they'll they'll walk, they'll work out. They'll do they'll do all of that just to kind of let off some steam. And. 00:31:16:10 - 00:31:40:56 Rob Yeah, because a lot of especially, especially the CAD designer stuff, you know, a lot of that's like up here and it's like little stuff and it's like, you know, get get the blood flowing, you know, get out of that environment, change your headspace for a second for you. Come back into it. That's really cool. However, I want to ask if you were speaking to either yourself or another lab that kind of, you know, ten, 20, 30 years ago, right, who is just now getting into this? 00:31:41:01 - 00:31:49:30 Rob What's one thing that you can tell them? If you can just say one thing, share one piece of advice with them. 00:31:49:34 - 00:32:17:32 Hardy Get plugged in wherever. If if you're first starting, get plugged in with a good lab. And and also find a source of of information. And what I mean by that is find a source of learning. And it's not just the lab, you know, it would also be, you know, just, you know, you got to have mentors. 00:32:17:37 - 00:32:44:34 Hardy And, I think if you find, like, there's there's some good ones out there, you know, you know, I was very, very blessed to be able to work with, you know, learn from John Archibald and in Provo, Utah and, and Jed and Mike and I know they've got amazing things going on out there. And then, you know, LVI is out there, the Dawson, the Spear Institute. 00:32:44:37 - 00:33:23:15 Hardy I mean, there's all kinds of places to learn, regardless of what it is. There's philosophies all over the place. But fine. None of them are bad, you know, find something and learn just I think that that finding a mentor and and and just diving into it. I think that's your that's a really good place to start. The other thing I would encourage is, is, you know, to a new lab is just staying close to your, your people, you know, stay close to the people you work with to your client base. 00:33:23:20 - 00:33:45:30 Hardy Don't ever, don't ever miss that. And, you know, there's. I've, I've I've made a lot of mistakes over my career, and, you know, good. Learned a lot. Hopefully. And, but that's a big one is just staying close to your people and, you know, and then when it comes to, you know, this the other. 00:33:45:34 - 00:34:09:30 Hardy I guess one last thing is, is don't be afraid of AI. You know, there's everybody is is kind of afraid of it. I would say I would say it's not an answer to a lot of things, but it's coming. And so I would encourage people to learn it and not be afraid of it. And, you know, evolve is a great place to, to learn from. 00:34:09:32 - 00:34:29:56 Hardy So you guys, they've got great a great team there. And putting yours truly. So, you know, you guys are you guys are great. And you know, having having mentors that you know, is is important. That would be kind of my, my advice. 00:34:30:01 - 00:34:44:42 Rob So I couldn't agree more. Having a good mentor is invaluable. It's impossible to put a price on that. It is. Thank you so much. Thank you for joining us for this question. People find you online. Where can they can find force mailing. Are you on social media. 00:34:44:46 - 00:34:58:22 Hardy Yeah. So.com is is the place to go. You can find us there. And it's got all of our contact information there. I'd love to hear from you guys. So for sure. 00:34:58:27 - 00:35:18:30 Rob Absolutely. Thank you again for joining us. And thank you, everyone else, for joining us for this episode of the Evolution of Dental Podcast. Look for us on all the social media platforms and all the podcast streaming platforms. As the Evolution of Dental podcast, we drop new episodes every Friday. We'd love to hear from you if you have any thoughts on this, especially some of the cool stuff that we just talked about with Hardy. 00:35:18:34 - 00:35:25:41 Rob Please remember to like, subscribe, share the show with your friends. Helps more than you know and never stop evolving.

Other Episodes